Timing belt drives

Self-guiding Conidrive timing belt drives feature the N10 belt-pulley system with an offset conical projection profile on the bearing surface to ensure positive fit without pulley flanges, even for narrow belts.

Features & benefits

• Nondirectional 10-mm pitch belts offer same meshing in both directions of travel

• Polyurethane, reinforced with steel tensile-cords for strength

• 500 to 1.000-mm lengths; belt stock also available in 50-m lengths

• Single, double, triple-row types featuring nonchordal action

• Fairloc integral hubs create a transverse wedge that remains attached to the solid portion of the hub on one side

Stock Drive Products

(516) 328-3300
www.sdp-si.com
Circle 151

Timing pulleys

Customized timing pulleys meet specific design requirements to minimize inertia, with special machining, tolerances, and finishes.

Features & benefits

• Aluminum, steel, stainless steel, delrin, nylon, etc.

• All pitch types XL, L, H, XH, T2.5, T5, T10, T20, AT5, AT10, AT20, HTD3, HTD5, HTD8, HTD14, STS3, STS5, STS8, GT5, GT8, and more

• Available in wide widths, with or without flanges or self-retracting V grooves

• Mount via keyways or set screws; machined to accept Taper-lock and QD bushings, and keyless locking devices

Onvio LLC

(866) 685-0404
www.onviollc.com
Circle 152

Stainless-steel sprockets

Stainless steel sprockets for synchronous belt drive systems carry high horsepower ratings.

Features & benefits

• Taper-Lock bushing system allows for easy sprocket installation and removal; resist rust, foam degreasers, and caustic washdown solutions

• With Poly Chain GT Carbon synchronous belts, provide a low-maintenance alternative for roller chain systems

• Don't release contaminants associated with lubricated sprockets and chains

• PowerGrip rubber synchronous belts are available with steel, sintered steel, grey iron, and ductile iron for durability

Gates Corp.

(303) 744-1911
www.gates.com/carbon
Circle 153

Synchronous belt drives

Synchronous Plus drives combine a high-capacity belt with a flexible, dual-sprocket design with both metric and standard-tapped holes.

Features & benefits

• 50% more horsepower capacity than standard construction high-torque drives

• Belt dimensions from 5 to 20-mm pitch

• Allow for use of smaller, lighter sprockets

• Helically wound fiberglass cords, chemically treated and designed for length stability, flexibility, and tensile strength for shock loads

• Precise tooth formation and accurate spacing for uniform transmission of power with resistance to tooth jump and shear

TB Wood's

(717) 264-7161
www.tbwoods.com
Circle 154